|
제품특징 | 제품사양 | 자료실 |
- 8 analog input channels
Strain gage and inductive measuring bridges (full, half, quarter), LVDT, RVDT
- DC and carrier frequency (CF) principle
DC excitation, 600 Hz CF excitation, 4.8 kHz CF excitation for bridges
- 1 analog output per channel
Voltage ±10 V, 10 kHz
- Fast high accuracy digitalization
24 bit ADC, 10 kHz sample rate per channel
- 1 digital in or output per channel
input: state, tare, memory reset
output: state alarm, thresh hold
- Signal conditioning
16 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- Galvanic isolation
of I/O-signals, power supply and interface Isolation voltage 500 VDC
제품특징 | 제품사양 | 자료실 |
Analog Inputs
Channel Number Accuracy Linearity error Repeatability Isolation voltage Measurement Type | 8 0.02 % typical 0.05 % in controlled environment 0.1 % in industrial area 0.01 % of the final value typical 0.003 % typical (within 24 h) 500 VDC channel to channel to power supply to interface Strain gage and LVDT, RVDT, inductive measuring bridges (full, half, quarter) |
Analog Output
Channel Number Accuracy DAC resolution Sample rate Output voltage Perm. load resistance | 8 voltage outputs 0.02 % 16 bit 10 kHz ±10 VDC >2 kΩ |
Analog/Digital-Conversion
Resolution Sample rate Conversion method Anti-aliasing filter Digital filter Averaging | 24 bit 10 kHz Sigma-Delta (group delay time 600 μs) DC: 2 kHz 3rd order 4.8 kHz CF: 1 kHz 3rd order 600 Hz CF: 100 Hz3rd order IIR, low pass, high pass, band pass, 4th order, 1 Hz up to 1 kHz in steps 1, 2, 5 configurable or automated according the selected data rate |
Digital In/Outputs
Input Input voltage Input current Lower / upper threshold Output Output voltage Output current Contact | state, tare, reset max. 30 VDC max. 1.5 mA <1.0 V (low) / >3.5 V (high) state, alarm, limit switch max. 30VDC max. 100mA open drain p-channel MOSFET |
Power Supply
Power supply Power consumption Influence of the voltage | 10 up to 30 VDC, overvoltage and overload protection approx. 2 W 0.001 %/V |
Environmental
Operating temperature Storage temperature Relative humidity | -20°C up to +60°C -40°C up to +85°C 5 % up to 95 % at 50°C, non condensing |
Mechanical
Type Dimensions (W x H x D) Protection system | 19" Standard, 1 unit (444 x 44 x 260) mm IP20 |
|