|
제품특징 | 제품사양 | 자료실 |
- e.bloxx D3-CAN - CAN input and output
CAN node 2.0A / 2.0B ref. to ISO 11898
- e.bloxx D3-COM - RS-485 und RS-232 Master
For connecting of serial devices and fieldbus slaves, standard protocol Modbus-RTU, others on request
- e.bloxx D3-SSI - RS-422 Master
For connection absolute encoders (e.g. angle, displacement) with SSI (serial synchrony interface)
- 6 digital inputs and 4 digital outputs
Definition of functions like status, alarm or counter
- RS-485 fieldbus (slave) interface
Profibus-DP, Modbus-RTU, ASCII
제품특징 | 제품사양 | 자료실 |
CAN Interface e.bloxx D3-CAN
Specification: Reference: ISO 11898 Function: Transfer: Bitset: Channels: |
CAN node 2.0A/2.0B ISO 11898 Send and receive of data and remote frames Recognition and generation of error frames Synchronization 1 Mbps – CAN high speed 11/29 bit 16 independent input or output variables |
RS-485 Interface e.bloxx D3-COM
Specification: Format: Baud rate: Protocols: |
RS-485 8E1 19.2; 38.4; 57.6; 93.75; 115.2 kbps Modus-RTU, specific |
RS-422 Interface e.bloxx D3-SSI
Specification: Input: - Signal: Code Bus clock |
RS-422 / push-pull symmetric Tx+/Tx- / Rx+/Rx 2-7 V ref. EIA RS-422 Binary, Gray-Code 100 kHz, 200 kHz, 250 kHz, 400 kHz, 500 kHz,
800 kHz, 1000 kHz, 2000 kHz |
Digital In/Outputs
input Function, Input voltage Input current Lower / upper threshold Output Function Reaction time Type of output Output voltage Output current |
6 6 x status max. 30 VDC max. 6 mA <2.0 V (low) / >10 V (high) 4 process or host controlled 1 ms per channel open collector max. 30 V max. 100 mA |
Power Supply
Power supply Power consumption Influence of the voltage |
10 to 30 VDC overvoltage and overload protection approx. 5 W 0.001 %/V |
Mechanical
Case Dimensions (W x H x D) and weight Protective system Mounting |
Aluminium and ABS 70 x 90 x 83 mm (2.76 x 3.54 x 3.27 in), 250
g (0.55 lb) IP20 DIN EN-Rail |
Environmental
Operating temperature Storage temperature Relative humidity |
-20°C up to +60°C -40°C up to +85°C 5 % up to 95 % at 50°C, non condensing |