|
제품특징 | 제품사양 | 자료실 |
voltage, current, resistance, potentiometer, Pt100, Pt1000, thermocouples, measuring bridges, IEPE sensors
- Fast high accuracy digitalization
24 bit ADC, 100 kHz sample rate per channel
- 1 digital in or output per channel
input: state, tare, memory reset
output: state alarm, threshold
- Signal conditioning
16 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
Galvanic isolation of I/O-signals, power supply and interface
- Isolation voltage 500 VDC
제품특징 | 제품사양 | 자료실 |
Analog Inputs
Channel Number Accuracy Linearity error Repeatability Isolation voltage Measurement Type |
2 0.01 % typical 0.025 % in controlled environment 0.05 % in industrial area 0.01 % of the final value typical 0.003 % typical (within 24 h) 500 VDC- channel to channel to power supply
to interface voltage, current, resistance, potentiometer,
Pt100, Pt1000,thermocouples, measuring bridges, IEPE-sensors |
Analog/Digital-Conversion
Resolution Sample rate Conversion method Anti-aliasing filter Digital filter Averaging |
24 bit 100 kHz (measurement thermocouple 8 Hz) Sigma-Delta (group delay time 380 μs) 20 kHz, 3rd order IIR, low pass, high pass, band pass, 4th order,
1 Hz up to 10 kHz in steps 1, 2, 5 configurable or automated according the
selected data rate |
Digital In/Outputs
Channel Number Response time Input state, tare, reset Input voltage Input current Lower / upper threshold Output Contact Load |
2 (1 digital I/O per channel) 0.2 ms state, tare, reset max. 30 VDC max. 0,5 mA <2.0 V (low) / >10 V (high) state, alarm open drain p-channel MOSFET 30 VDC / 100 mA (ohmic load) |
Power Supply
Power supply Power consumption Influence of the voltage |
10 up to 30 VDC, overvoltage and overload
protection approx. 2 W <0.001 %/V |
Environmental
Operating temperature Storage temperature Relative humidity |
-20°C up to +60°C -40°C up to +85°C 5 % up to 95 % at 50°C, non condensing |
Mechanical
Case Dimensions (W x H x D) Weight Mounting |
Aluminum and ABS (27 x 120 x 105) mm approx. 200 g DIN EN-rail |