 |
|
| 제품특징 | 제품사양 | 자료실 |
Voltage, current, resistance, Pt100, Pt1000, thermocouples, meaurement bridges
- 1 digital input per channel
Status, reset
- 1 solid state relay output per channel
Status, alarm, threshold, tolerance band
- ADC-conversion and signal conditioning with 19 bit up to 1000/s
Linearization, digital filter, average, scaling, min/max memory, arithmetics
- RS 485 fieldbus interface
Profibus-DP, Modbus-RTU, ASCII
| 제품특징 | 제품사양 | 자료실 |
Analog Inputs
|
Accuracy Repeatability Measurement Type |
0.01 % typical 0.02 % in controlled environment 0.05 % in industrial area 0.003 % typical (within 24 h) Voltage, current, resistance, bridges Potentiometer,
Pt100, Pt1000, thermocouples |
Analog/Digital-Conversion
|
Resolution Sample rate Conversion method Filter |
19 bit 1000 samples/sec for voltage, current, potentiometer, bridge 10 samples/sec for resistance, RTD 5 samples/sec for thermocouples
Sigma-Delta Anti-aliasing Bessel filter 4th ord. 200
Hz variable digital low pass filter 1st
order averaging, sliding averaging |
Digital In/Outputs
|
Input Input voltage Input current Lower / upper threshold Output Contact Nominal load Galvanic isolation |
status, tare, reset max. 30 VDC max. 0,5 mA <2.0 V (low) / >10 V (high) Solid State Relay output Opto – MOSFET 60 VDC / 100 mA (ohmic load) 500 V |
Power Supply
|
Power supply Power consumption e.bloxx A1-1 e.bloxx A1-4 Influence of the voltage |
10 to 30 VDC overvoltage and overload protection approx. 1.5 W approx. 6 W 0.001 %/V |
Mechanical
|
Case Dimensions (W x H x D) and weight e.bloxx A1-1 e.bloxx A1-4 Protective system Mounting |
Aluminium and ABS 45 x 90 x 83 mm, 160 g 104 x 90 x 83 mm, 500 g IP20 DIN EN-Rail |
Environmental
|
Operating temperature Storage temperature Relative humidity |
-20°C up to +60°C -40°C up to +85°C 5 % up to 95 % at 50°C, non condensing |
Warm Up Time
All declarations are valid after a warm up time of 45
minutes