|
제품특징 | 제품사양 | 자료실 |
Description
The Wien Filter is a charged particle separator with a crossed electric and magnetic field configuration (ExB).
It is characterized by a high dispersion at very small overall dimensions.
The ion species of interest with a specific velocity due to its mass-to-charge ratio passes the Wien
Filter straightforward by properly adjusted electric and magnetic fields.
All other species are deflected and absorbed between the Wien filter apertures.
The setup is delivered with weak and strong permanent magnets (200 mT / 500 mT) which
can easily be mounted and unmounted outside of the beamline vacuum.
If necessary, the integral particle beam can pass the filter without deflection by simply removing the filter magnets.
The weak permanent magnets allow for analyzing a larger measurement range towards fast ions
of low mass-to-charge ratios.
For heavy ion beams the strong magnets are used as these beams are more stiff regarding deflection
in the magnetic field and higher dispersion is necessary to separate individual mass-to-charge ratios.
Furthermore, different sizes of apertures (0.5 mm, 1.0 mm, 1.5 mm) are available.
A smaller aperture at the entrance and exit of the filter results in a higher resolution.
However, depending on the size of the ion beam, smaller diameters may lead to a reduction
of the ion transport efficiency through the setup.
Figure 1 - Wien filter xenon spectrum
To give an example of the Wien filter resolution, a monoisotopic xenon spectrum was measured at
a test setup with a DREEBIT electron beam ion source at an ion beam energy of 13.6 keV per
charge state and a 1.0 mm filter aperture,
see Figure 1. It shows that even the highest charge states Xe45+ and Xe46+ can still clearly be separated.
제품특징 | 제품사양 | 자료실 |
Parameters
Wien Filter Parameters | |
magnetic induction on-axis | 200 mT or 500 mT |
entrance / exit apertures | 0.5 mm, 1.0 mm, or 1.5 mm |
max. electrode voltage | ±1 kV |
General Parameters | |
beamline attachment flanges | DN 100 CF, other flange types available |
dimensions (length x width x height) | 153 mm x 300 mm x 170 mm |
weight | 10 kg (22 lbs) |
Infrastructural Requirements | |
vacuum conditions during operation | suitable from 1e-10 mbar up to atmospheric pressure |
proposed power supply | 2-channel, ±1 kV incl. HV cables with SHV plugs |
DOWNLOAD ProductSheet_HighCurrAnMag.pdf